Log in to your Crowdin Account, then click on you account icon, then click on "Settings" (see example below);
In the "Account Settings" section, scroll down to "Authenticator app", then click 
;
You will then be presented with a QR code;
As the generated QR code is very compact we strongly suggest you enlarge this QR code prior to scanning it in the programming app.
The QR code can now be burned onto you programmable token (see procedure below);
- To program a SafeID/Diamond or SafeID/Pro token with a QR code, launch the SafeID/Diamond programming tool.
Click the Scan QR Code button
Before you scan the QR code please ensure that the clock on your computer is displaying the correct date and time.
You can scan the screen for a QR code, or load from a file.
If you are scanning the barcode on the screen please ensure that the QR code is not obscured by other windows, and if you have more than one monitor please ensure that both the app and the QR code are displayed on the main display (display 1).
If you still have difficulty in scanning the QR code double check you only have the one instance of the app running, and that it is the latest version of the app. In most cases when there are issues with scanning of the QR code the most likely cause is the QR code contains the wrong data and may need to be regenerated. To test the QR code you could check that the code works correctly with the authenticator app it is intended for (e.g microsoft authenticator), and if this fails then you know that the QR code will need to be regenerated.
Select Scan Screen.
If succeeded, the Seed box should be filled with the token's seed data.
Now, select your smart card reader from the Reader drop-down list, e.g. "HID OMNIKEY 5427 CK"
Press the Connect button
Now, switch on a SafeID token and place it on the reader.
The tool will read out the token's serial number and time, and display them:
If you want to correct the clock on the token, then leave the "Sync Token Clock" checked, but first ensure the time on your pc is set correctly.
Switch off the token and switch it on again to generate a new code (the token may only use the new seed after being reset)
Related Articles
Verifying your token
Once you have programmed your token you will need to verify it with CloudFlare.
Obtain the requested 6-digit code from your programmable token and enter it into the field prompted "Verification Code", then click 
;
You will then be asked to confirm you credentials – at the "Password" prompt enter your password, then click 
;
You will then be presented with a list of recovery codes - we advise you keep a copy of these codes (as a precaution to the token being lost etc).
After exiting the last screen you will return to your account settings and will discover that the Authentication app option is now enabled;
The hardware token is now ready to be used when you next log in to your Crowdin account.
Log out, then back in to your Croudin account, then after supplying your username and password you will be prompted for your second factor;
Obtain an OTP code from your hardware token, then supply the code at the prompt "Verifcation Code", then click 
, and you will be logged in to your Crowdin account