Log in to your SquareSpace Dashboard account, then in the "Account and security" section turn on "Two-factor authentication" by clicking on the area indicated below;
You will then be presented with a list of authentication methods that are available, select "Authentication app" by clicking on "SET UP";
You will next need to select the account that will be protected;
You will be presented with a page that includes a QR code (see example below);
Expand the section "CAN'T SCAN QR CODE" so that you are able to see the seed data that will be sent to the token;
You can use the QR code to program our programmable tokens. The extracted seed data should match the code shown underneath the "CAN'T SCAN QR CODE" (if you have any issues scanning the QR code you can manually copy this code to the seed field on the programming app).
The instructions for programming the token using the QR code can be found here;
- To program a SafeID/Diamond or SafeID/Pro token with a QR code, launch the SafeID/Diamond programming tool.
Click the Scan QR Code button
Before you scan the QR code please ensure that the clock on your computer is displaying the correct date and time.
You can scan the screen for a QR code, or load from a file.
If you are scanning the barcode on the screen please ensure that the QR code is not obscured by other windows, and if you have more than one monitor please ensure that both the app and the QR code are displayed on the main display (display 1).
If you still have difficulty in scanning the QR code double check you only have the one instance of the app running, and that it is the latest version of the app. In most cases when there are issues with scanning of the QR code the most likely cause is the QR code contains the wrong data and may need to be regenerated. To test the QR code you could check that the code works correctly with the authenticator app it is intended for (e.g microsoft authenticator), and if this fails then you know that the QR code will need to be regenerated.
Select Scan Screen.
If succeeded, the Seed box should be filled with the token's seed data.
Now, select your smart card reader from the Reader drop-down list, e.g. "HID OMNIKEY 5427 CK"
Press the Connect button
Now, switch on a SafeID token and place it on the reader.
The tool will read out the token's serial number and time, and display them:
If you want to correct the clock on the token, then leave the "Sync Token Clock" checked, but first ensure the time on your pc is set correctly.
Switch off the token and switch it on again to generate a new code (the token may only use the new seed after being reset)
Related Articles
Verifying your token
Once you have programmed your token you will need to verify it with SquareSpace.
Return to the SquareSpace Dashboard and click 
, and you will be asked to provide an authentication code;
Once verified the programmable token is ready to supply OTP codes and you will be provided with backkup codes (which should be retained for possible use in the future).
The programmable token is now ready to be used when logging in to your SquareSpace dashboard account.