LinkedIn is an online, professional networking service primarily used for career development, job searching, and business connections.

After logging in to your linked in account, use use the dropdown on your user account icon (top right), and select the option "Settings & Privacy";

Then from the Settings options select "Sign in & security";

A list of account access methods will now be shown, enable the option "Two-factor authentication" by clicking on the link (indicated below)'

You will now be offered to set up Two-factor authentication, click on the button ;

Using the dropdown "Choose your authentication method", select the option "Authenticator App", then click ;

A 6 digit code will now be sent to your email account, after retrieving the code enter it into the box then click

You can now proceed to setting up your authentication app (click );

Before progressing you will need to supply your linked in password, then click "Submit";

You will now be presented with a QR code;

You can use the QR code to program our programmable tokens using the instructions found in the following procedure;

To program a SafeID/Diamond or SafeID/Pro token with a QR code, launch the SafeID/Diamond programming tool.

Click the Scan QR Code button
Before you scan the QR code please ensure that the clock on your computer is displaying the correct date and time.
You can scan the screen for a QR code, or load from a file.
If you are scanning the barcode on the screen please ensure that the QR code is not obscured by other windows, and if you have more than one monitor please ensure that both the app and the QR code are displayed on the main display (display 1).
If you still have difficulty in scanning the QR code double check you only have the one instance of the app running, and that it is the latest version of the app. In most cases when there are issues with scanning of the QR code the most likely cause is the QR code contains the wrong data and may need to be regenerated. To test the QR code you could check that the code works correctly with the authenticator app it is intended for (e.g microsoft authenticator), and if this fails then you know that the QR code will need to be regenerated.

Select Scan Screen.
If succeeded, the Seed box should be filled with the token's seed data.

Now, select your smart card reader from the Reader drop-down list, e.g. "HID OMNIKEY 5427 CK"

Press the Connect button

Now, switch on a SafeID token and place it on the reader.
The tool will read out the token's serial number and time, and display them:

If you want to correct the clock on the token, then leave the "Sync Token Clock" checked, but first ensure the time on your pc is set correctly.
Press the Burn button

The token is successfully programmed.
Switch off the token and switch it on again to generate a new code (the token may only use the new seed after being reset)
Related Articles