Logon to the NetMotion Mobility Server
Click on Configure>Authetication Settings
Option - You may set up a separate authentication profile or use the global settings.
To create a separate Profile simply click New on the top left and give the profile a name, at the prompt.
You can then select the profile you wish to use, here.
There are three settings that need to be applied. The settings are found in the middle pane.
| Section | Option |
|---|---|
| Authentication | Protocol |
| RADIUS: User Authentication | Retransmit Interval |
| RADIUS: User Authentication | Servers |
Click on Protocol
Select RADIUS - EAP (PEAP and EAP-TLS)
Click Apply
Select Retransmit Interval (under 'User Authentication')
Click on Servers (under 'User Authentication')
Click the Add button
In the RADIUS Server Entry, please enter the following information:
| Option | Value |
|---|---|
| Host address: | Enter the IP address of machine that your DualShield Radius Server was installed |
| Port: | 1812 |
Shared Secret: & Confirm Shared Secret: | The shared secret will match the one you created when Registering NetMotion as a RADIUS client |
Click: OK
Client Settings
Click on Configure>Client Settings
Option - You may apply the following settings to device or user groups or just apply globally.
There are two settings that need to be applied. The settings are found in the middle pane under Logon
| Section | Option |
|---|---|
| Logon | Always Prompt for User Credentials |
| Logon | Connecting Dialog Duration |
Select the option Always Prompt for User Credentials
Enable Always prompt when connecting
Click Apply
Select the option Connecting Dialog Duration
Change Wait time to 120 seconds
Click Apply
