You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 10 Next »

Prerequisites

DualShield Windows Logon Agent is a bridge that connects DualShield Windows Logon clients and the DualShield Authentication Server. The Logon Agent can be installed on any Windows server machine in the network.

Before you run the setup wizard, you must have your DualShield Authentication Server installed and operating, and make sure that the computer on which you are going to install the Windows Logon Agent meets the following minimum hardware and software requirements:

  • A Windows  2008 R2, 2012 R2, 2016 or 2019 Server with the latest service pack installed.
  • TCP/IP Networking
  • TCP port 14282 and/or 14284 must be available on the Windows server for use by the DualShield Computer Logon Agent.

Enable Agent Registration

In order to install a DualShield Computer Logon Agent, we need to first enable the Agent Registration option.


For an authentication agent to be able to connect to the DualShield authentication server, the agent must be registered in the DualShield authentication server.

For security purposes, the agent registration function is disabled by default. You need to enable the Agent Auto Registration function in your DualShield authentication server.

From the management console, navigate to "Authentication | Agents", then click  


A new window will now open titled "Auto Registration", ensure the "Enabled" option is selected, then click ;


Tick the "Enabled" option first, then fill in the Starts and Expires date.

You may want to enable the "Check IP" option for extra security. If this option is enabled, then in the "IP Addresses" field you must enter the IP address of the machine where the authentication agent is being installed.

Click on the button, and Auto-Registration will now take place during the installation of the RADIUS server.

Install DualShield Windows Logon Agent 

To install the DualShield Windows Logon Agent, launch the installer

To install the DualShield Windows Logon Agent, launch the installer SetupDSAgent-xxx.yyyy.exe (where xxx is the version number and yyyy the build number) and go through the following steps:

Step 1: Welcome

Step 2:  License Agreement

Step 3: Installation Path

Step 4: Install GINA or Credential Provider

Enable the option: “Enable multi-factor authentication on this machine” only if you wish to protect the server machine on which the Windows Logon Agent is being installed. Otherwise, do not check this option.

Enable the option: “Protect local computer logon with multi-factor authentication" only if the server machine on which the Windows Logon Agent is being installed is a terminal server and you want to add two-factor authentication to the logon to the local machine.

Step 5: Agent Registration

Check the FQDN and Port number of your DualShield Server. Change them if necessary. The default port of DualShield server is 8071.

Step 6: Installing...

Step 7: Publish application

Upon the successful installation, the installer launches the DualShield Windows Logon Manager which enables you to connect the agent to the authentication server.

In the “Application” field, it displays “Click here to select”.

At this point, the agent has been successfully installed and registered with the DualShield server. It is waiting for an application to be published on this agent.

The next step is to publish a Windows application on this agent.




Step 8: Complete installation








  • No labels