To program a token, launch the programming tool, SafeID-Programmer.exe
Follow 4 simple steps below:
- Obtain Seed
- Connect Reader
- Place Token
- Burn Seed
Step 1: Obtain Seed
There are 4 ways you can obtain the seed data or secret key:
- Scan QR Code
- Load Seed File
- Randomly Generated
- Manually Copied
Before you scan the QR code please ensure that the clock on your computer is displaying the correct date and time.
You can scan the screen for a QR code, or load from a file.
If you are scanning the barcode on the screen please ensure that the QR code is not obscured by other windows, and if you have more than one monitor please ensure that both the app and the QR code are displayed on the main display (display 1).
If you still have difficulty in scanning the QR code double check you only have the one instance of the app running, and that it is the latest version of the app. In most cases when there are issues with scanning of the QR code the most likely cause is the QR code contains the wrong data and may need to be regenerated. To test the QR code you could check that the code works correctly with the authenticator app it is intended for (e.g microsoft authenticator), and if this fails then you know that the QR code will need to be regenerated.
You can also load seed data directly from a file. The seed file must be in CSV format, containing 2 columns of data, i.e. Serial Number and Based32 encoded Secret Key.
Step 2: Connect Reader
Plug in the reader to the USB port of your computer, and select the reader from the "Token Reader" down-down lit
Click "Connect"
The tool should display "Token reader connected" and the time of the computer clock.
Step 3: Place Token
To program a token, you need to switch on the token device into the programming mode.
Press the power button on the device and hold the button down for 3 seconds until it displays "programming mode" on its LCD screen
Place the token on the reader. You should hear a beep sound, and the light on the reader should turn green.
The tool will now display the token's serial number and time details:
Step 4: Burn Seed
Before burning the seed into the token, you must make sure the following options are correctly set:
| Option | |
|---|---|
| Token Slot | Select the slot you want to program & save the token |
| Token Title | |
| Time Step | |
| Algorithm | |
| OTP Length | |
| Sync Token Clock |
To burn the seed into the token, click "Burn"
Seed Files
If you selected to export the seed, then you will find that seed files will have been created in a sub-folder from where app was launched (the sub-folder is called "data" and contains seed files of various formats).
