We need to add DualShield RADIUS to the Authentication Profile we created earlier, e.g. "DualShield RADIUS", and configure its properties.
| Table of Contents |
|---|
Add Dualshield RADIUS server
1. Go to Mobility console > Configure > Authentication Settings.
2. In the left pane, select the Authentication Profile we have created for RADIUS authentication, e.g. "DualShield RADIUS"
3. In the middle pane, select "RADIUS: User Authentication | Servers"
4. In the right pane, tick "DualShield RADIUS Authentication Setting Override"
5. Click the "Add" button to add your DualShield RADIUS server
6. Click "OK" to save it
Set RADIUS Retransmit Interval
Now that we have added your DualShield RADIUS server to your Mobility server, we need to configure a few options
1. In the middle pane, click "RADIUS: User Authentication | Retransmit Interval".
2. In the right pane, tick "DualShield RADIUS Authentication Setting Override"
3. Set the Interval to 40,000 or larger
4. Click "Apply" to save the change
| Table of Contents |
|---|
Authentication Settings
Logon to the NetMotion Mobility Server
...
| border | true |
|---|
...
Click on Configure>Authetication Settings
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Option - You may set up a separate authentication profile or use the global settings.
...
| border | true |
|---|
...
To create a separate Profile simply click New on the top left and give the profile a name, at the prompt.
You can then select the profile you wish to use, here.
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
| border | true |
|---|
...
There are three settings that need to be applied. The settings are found in the middle pane.
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Click on Protocol
...
| border | true |
|---|
...
Select RADIUS - EAP (PEAP and EAP-TLS)
Click Apply
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Select Retransmit Interval (under 'User Authentication')
...
| border | true |
|---|
| Column |
|---|
| Enter an interval long enough for a user’s mobile device to receive and respond to authentication requests. Recommended: at least 40000 milliseconds. |
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Click on Servers (under 'User Authentication')
...
| border | true |
|---|
| Column |
|---|
Click the Add button |
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
| border | true |
|---|
...
In the RADIUS Server Entry, please enter the following information:
...
Shared Secret:
&
Confirm Shared Secret:
...
The shared secret will match the one you created when Registering NetMotion as a RADIUS client
Click: OK
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Client Settings
...
| border | true |
|---|
| Column |
|---|
Click on Configure>Client Settings |
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
| border | true |
|---|
| Column |
|---|
Option - You may apply the following settings to device or user groups or just apply globally. |
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
...
| border | true |
|---|
...
There are two settings that need to be applied. The settings are found in the middle pane under Logon
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Select the option Always Prompt for User Credentials
...
| border | true |
|---|
| Column |
|---|
Enable Always prompt when connecting Click Apply |
...
| width | 60% |
|---|
| Panel | ||||||
|---|---|---|---|---|---|---|
| ||||||
|
Select the option Connecting Dialog Duration
...
| border | true |
|---|
| Column |
|---|
Change Wait time to 120 seconds Click Apply |
...
| width | 60% |
|---|
...
| borderColor | #9EBEE5 |
|---|---|
| bgColor | #FFFFFF |
| borderWidth | 1px |
...