We are going to assume that you already know how to configure your FortiGate appliance.  However, for your convenience, here is a summary of how to set up the IPSec VPN tunnel

  1. Log in to the Fortinet FortiGate administrative interface.
  2. Navigate to VPN>VPN Wizard
  3. Run through the wizard using the summary table below:

    SectionField/OptionValue
     Tunnel NameFriendly Name
     Select a TemplateRemote Access
    VPN Tunnel


    		VPN Client TypeFortiClient
     Authentication MethodPre-shared Key
     Pre-shared KeySet a strong Key

    		User GroupSelect the VPN Users group which
    you created to use with DualShield 
    Radius

    		DNS ServerYour internal DNS or 8.8.8.8
    Remote Endpoint


    		Client Address RangeRange of IP addresses that will be
    Assigned to the client upon connection
    Local FortiGate


    		Incoming Interface

    Assign the port that the VPN  Client will be

    connecting to (e.g. port2)


    		Local Interface

    This is the port you can access Fortgate UI

    on (e.g. port1)