If you want to upgrade a DualShield RADIUS server from version 6.5 or earlier to version 6.9 or later, then you need to follow this instruction.
From version 6.9 or later, you cannot directly upgrade an old version (version 6.5 or earlier) to the latest version (version 6.9 or later). You will have to uninstall the existing RADIUS server first, then install a new RADIUS server. This process will not require you to make any changes to the configurations and settings in your DualShield system, as long as the name of the new RADIUS server is the same as the old RADIUS server.
Upgrades and new installations are now performed using the radius installation pack (named as "setup-dual-radius-xxx-signed") which is downloaded from the Deepnet Support portal;
Log into the DualShield Admin Console, and navigate to "Radius | Radius Server"
Take note of the name of the RADIUS server to be upgraded., e.g. "LOCAL-RADIUS"
Both for Radius server upgrades, and fresh installations, you will now need to log in to the admin console and enable auto-registration.
To install the new Radius server run the installer as administrator;
A new window titled "DUALSHIELD - DualRadius" will open welcoming you to the installation of the Radius Server;
|
After waiting a couple of minutes for the DualRadius service to start, Log in to the admin console, then navigate to "Radius | Radius Servers".
Left click on the context menu of your newly installed radius server, the select the option "Synchronise";
You should now see a confirmation that the Radius server has been synchronised;
Your DualShield RADIUS server has been upgraded successfully.